Skip to content
RV Gear Pro

Blinds

Pleated blinds are what most newer RVs run on the big windows — they fold up flat, take almost no room, and soften the light without a full blackout. The catch is road vibration: an unsecured blind swings and slaps the glass every time you hit a bump. This category covers the pleated shade hold-downs and fabric snap fasteners that lock a blind down for travel, so it stays put from the driveway to the campsite.

4 products

Keeping RV blinds working and quiet

The blind itself is the easy part. What separates a factory-quiet ride from a rattly one is the hardware that pins the shade down while you're rolling and lets it move freely once you're parked. Most of what you'll actually replace on an RV blind is that hardware, not the pleated fabric.

  • Hold-downs. A pleated shade hold-down is a small clip — the RV Designer clear-plastic 2-packs here are the common type — that catches the bottom rail and anchors it to the frame so the blind can't swing in transit. Clear plastic disappears against the window; match the mounting screw spacing to your existing shade.
  • Snap fasteners. The RV Designer six-piece snap kit uses fabric-to-wall snaps to secure a panel or valance, and it comes with the setting tools so you're not hunting for a separate press. Handy for curtains and any fabric that needs to stay flat against the wall.
  • Pleat condition. A blind that won't hold a fold or sags on one side is usually worn cord or a bent rail, not something a hold-down fixes. Check the raise cord and the head rail before assuming the whole unit is done.

If your rig runs fabric panels on a track instead of pleated blinds, the curtain track and carrier parts are one category over. For heat and blackout on the same window, a reflective or dual-layer cover from day & night shades pairs with a blind without much fuss.

Frequently asked questions